/*
    Continuously waits for any arp requests and sends replies to them.
 
    run program as
      anettest -d eth0 -f this_file.fws
 */

INCLUDE   PARAMETERS: <name of file>
Starts processing the content of given file. The search of file will be performed in the current directory, all search paths (see option -I). For every path the content of samples, headers, traces folders will be also examined. You can also type just the name of file without INCLUDE   PARAMETERS: <name of file>
Starts processing the content of given file. The search of file will be performed in the current directory, all search paths (see option -I). For every path the content of samples, headers, traces folders will be also examined. You can also type just the name of file without INCLUDE   PARAMETERS: <name of file>
Starts processing the content of given file. The search of file will be performed in the current directory, all search paths (see option -I). For every path the content of samples, headers, traces folders will be also examined. You can also type just the name of file without include before it.

 before it.

 before it.

 arp

DEFINE   PARAMETERS: <name> <value>
Defines the substitution which will be applied while reading some values (in parameters to commands and others). <name> will be replaced by <value>. This substitution may be also performed in strings enclosed in apostrophes. In this case the <name> must be enclosed in $ (ex: 'value = $name$'. See also command GDEF   PARAMETERS: <new name> <original name>
Defines the substitution which will be applied while reading almost any read word from text. <New name> will be replaced by <original name>. This substitution may be also performed in strings enclosed in apostrophes. In this case the name must be enclosed in $ (ex: 'value = $name$').

.

 neededIP 10.178.205.1       // input here the IP address of target host
DEFINE   PARAMETERS: <name> <value>
Defines the substitution which will be applied while reading some values (in parameters to commands and others). <name> will be replaced by <value>. This substitution may be also performed in strings enclosed in apostrophes. In this case the <name> must be enclosed in $ (ex: 'value = $name$'. See also command GDEF   PARAMETERS: <new name> <original name>
Defines the substitution which will be applied while reading almost any read word from text. <New name> will be replaced by <original name>. This substitution may be also performed in strings enclosed in apostrophes. In this case the name must be enclosed in $ (ex: 'value = $name$').

.

 myMac 00:19:5b:e9:ef:5b

// variables (automatically initialized on an expected packet reception)

VAR   PARAMETERS: <name of variable> <name of field> <initial value> ("autoset"| ["static"] )
Command creates the new variable <name of variable> or reinitializes the old one if some variable of the same name is already exist. The newly created variable will have the same value's type as <name of field>. This command also sets the <initial value> for variable. Variable's value is stored separately from packet's buffer. The "autoset" type of variable indicates that the variable will be initialized by received packet (while using WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command or its analogs), i.e. from received packet will be obtained value of <name of field> and copied to variable. "static" type indicates that variable must not be changed while receiving packet. The "static" keyword may be omitted only if parameters to command are enclosed in round brackets.
The <name of variable> may appear among parameters to other commands. In this case it will be replaced by its value. Such a replacement will be also performed in strings enclosed in apostrophes. In this case the <name of variable> must be enclosed in $ (ex: 'value of variable = $name$').
See "samples/ask_mac.fws", "samples/variables.fws".

 victimIP arp.srcip 0.0.0.0 autoset
VAR   PARAMETERS: <name of variable> <name of field> <initial value> ("autoset"| ["static"] )
Command creates the new variable <name of variable> or reinitializes the old one if some variable of the same name is already exist. The newly created variable will have the same value's type as <name of field>. This command also sets the <initial value> for variable. Variable's value is stored separately from packet's buffer. The "autoset" type of variable indicates that the variable will be initialized by received packet (while using WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command or its analogs), i.e. from received packet will be obtained value of <name of field> and copied to variable. "static" type indicates that variable must not be changed while receiving packet. The "static" keyword may be omitted only if parameters to command are enclosed in round brackets.
The <name of variable> may appear among parameters to other commands. In this case it will be replaced by its value. Such a replacement will be also performed in strings enclosed in apostrophes. In this case the <name of variable> must be enclosed in $ (ex: 'value of variable = $name$').
See "samples/ask_mac.fws", "samples/variables.fws".

 victimMacAdr srcmac 00:16:17:17:4f:d8 autoset

// description of the arp request to wait

INCLUDE   PARAMETERS: <name of file>
Starts processing the content of given file. The search of file will be performed in the current directory, all search paths (see option -I). For every path the content of samples, headers, traces folders will be also examined. You can also type just the name of file without INCLUDE   PARAMETERS: <name of file>
Starts processing the content of given file. The search of file will be performed in the current directory, all search paths (see option -I). For every path the content of samples, headers, traces folders will be also examined. You can also type just the name of file without INCLUDE   PARAMETERS: <name of file>
Starts processing the content of given file. The search of file will be performed in the current directory, all search paths (see option -I). For every path the content of samples, headers, traces folders will be also examined. You can also type just the name of file without include before it.

 before it.

 before it.

 arp

NAME   PARAMETERS: <name of packet>
Defines the name of currently described packet which will be displayed in report instead of not obvious "Packet on line ..."

 "arp_request"
arp.opcode = areq
dstmac = 0xffffffffffff
arp.dstip = neededIP

	ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 (WAITALL   PARAMETERS: no parameters
The analog of WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command (or using of UNFIX   PARAMETERS: no parameters
By default after the work of WAIT command (its analogs) the statuses for all waited packets will be fixed, so there may be no packets to wait for the next call to WAIT. This command marks these old packets as newly added. The previous status for them will be lost. Take a note of that ALL old packets will be unfixed, so they will be waited: this may cause unexpected results. Consider the use of CLEARREG   PARAMETERS: no parameters
Clears the information about all the packets which were added to the waited ones (by WAIT, ADD   PARAMETERS: 
Alias of TOWAIT command.

 commands). They will not be displayed in final report (or in the report that is displayed by SHOWREP   PARAMETERS: no parameters
Displays a report which is the same as that displayed while program termination.

 command). If this command is typed at the end of script then it omits the displaying of final report (sense there are no packet in it).

 command.

 command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

 but before WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

 started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.



// infinite cycle

CYC   PARAMETERS: <number of iterations>
Command instructs that next WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) or next block of script will be processed by several times = <number of iterations>. The "inf" value is available which means infinite iterant processing.

 inf {

   WAITALL   PARAMETERS: no parameters
The analog of WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 (WAITALL   PARAMETERS: no parameters
The analog of WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command (or using of UNFIX   PARAMETERS: no parameters
By default after the work of WAIT command (its analogs) the statuses for all waited packets will be fixed, so there may be no packets to wait for the next call to WAIT. This command marks these old packets as newly added. The previous status for them will be lost. Take a note of that ALL old packets will be unfixed, so they will be waited: this may cause unexpected results. Consider the use of CLEARREG   PARAMETERS: no parameters
Clears the information about all the packets which were added to the waited ones (by WAIT, ADD   PARAMETERS: 
Alias of TOWAIT command.

 commands). They will not be displayed in final report (or in the report that is displayed by SHOWREP   PARAMETERS: no parameters
Displays a report which is the same as that displayed while program termination.

 command). If this command is typed at the end of script then it omits the displaying of final report (sense there are no packet in it).

 command.

 command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

 but before WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

 started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command (or using of UNFIX   PARAMETERS: no parameters
By default after the work of WAIT command (its analogs) the statuses for all waited packets will be fixed, so there may be no packets to wait for the next call to WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

. This command marks these old packets as newly added. The previous status for them will be lost. Take a note of that ALL old packets will be unfixed, so they will be waited: this may cause unexpected results. Consider the use of CLEARREG   PARAMETERS: no parameters
Clears the information about all the packets which were added to the waited ones (by WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

, ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 commands). They will not be displayed in final report (or in the report that is displayed by SHOWREP   PARAMETERS: no parameters
Displays a report which is the same as that displayed while program termination.

 command). If this command is typed at the end of script then it omits the displaying of final report (sense there are no packet in it).

 command.

 command).

    // waits requests

   IFR   PARAMETERS: <name of packet or status of last wait operation> "{" <block of script> "}" [ "else" "{" <second block of script> "}" ]
Processes the block of script if the last received packet (command WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

, its analogs) has the given name (which was specified by command NAME   PARAMETERS: <name of packet>
Defines the name of currently described packet which will be displayed in report instead of not obvious "Packet on line ..."

). "timeout" may be specified as the name of packet what means that the block must be processed in the case of timeout. Command will not distinguish newly added packets and old ones if they have the same name. Take a note of it when using UNFIX   PARAMETERS: no parameters
By default after the work of WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) the statuses for all waited packets will be fixed, so there may be no packets to wait for the next call to WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

. This command marks these old packets as newly added. The previous status for them will be lost. Take a note of that ALL old packets will be unfixed, so they will be waited: this may cause unexpected results. Consider the use of CLEARREG   PARAMETERS: no parameters
Clears the information about all the packets which were added to the waited ones (by WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

, ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 commands). They will not be displayed in final report (or in the report that is displayed by SHOWREP   PARAMETERS: no parameters
Displays a report which is the same as that displayed while program termination.

 command). If this command is typed at the end of script then it omits the displaying of final report (sense there are no packet in it).

 command.

 command. See also CLEARREG   PARAMETERS: no parameters
Clears the information about all the packets which were added to the waited ones (by WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

, ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 (WAITALL   PARAMETERS: no parameters
The analog of WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command (or using of UNFIX   PARAMETERS: no parameters
By default after the work of WAIT command (its analogs) the statuses for all waited packets will be fixed, so there may be no packets to wait for the next call to WAIT. This command marks these old packets as newly added. The previous status for them will be lost. Take a note of that ALL old packets will be unfixed, so they will be waited: this may cause unexpected results. Consider the use of CLEARREG   PARAMETERS: no parameters
Clears the information about all the packets which were added to the waited ones (by WAIT, ADD   PARAMETERS: 
Alias of TOWAIT command.

 commands). They will not be displayed in final report (or in the report that is displayed by SHOWREP   PARAMETERS: no parameters
Displays a report which is the same as that displayed while program termination.

 command). If this command is typed at the end of script then it omits the displaying of final report (sense there are no packet in it).

 command.

 command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

 but before WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

 started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 commands). They will not be displayed in final report (or in the report that is displayed by SHOWREP   PARAMETERS: no parameters
Displays a report which is the same as that displayed while program termination.

 command). If this command is typed at the end of script then it omits the displaying of final report (sense there are no packet in it).

 command.  
For tcp (udp) this command is also used to check the general status of last waiting operation. Status string "error" may be given to check if connection is closed already. Check for timeout or error may be also performed just after opening of connection by command OPEN   PARAMETERS: <interface's type> <interface's name>
Opens interface of given type. Types: eth, ip, tcp, udp. For tcp this command will wait till connection with server is established or a client connection is accepted. For other types the command won't wait. See more in -d,-p,-T options.

. See samples/tcp_gateway, samples/http_client, samples/http_server.

 arp_request {		// if a packer 'arp_request'
 has been received

      // description of the arp reply

      INCLUDE   PARAMETERS: <name of file>
Starts processing the content of given file. The search of file will be performed in the current directory, all search paths (see option -I). For every path the content of samples, headers, traces folders will be also examined. You can also type just the name of file without INCLUDE   PARAMETERS: <name of file>
Starts processing the content of given file. The search of file will be performed in the current directory, all search paths (see option -I). For every path the content of samples, headers, traces folders will be also examined. You can also type just the name of file without INCLUDE   PARAMETERS: <name of file>
Starts processing the content of given file. The search of file will be performed in the current directory, all search paths (see option -I). For every path the content of samples, headers, traces folders will be also examined. You can also type just the name of file without include before it.

 before it.

 before it.

 arp

      srcmac = mymac
      dstmac = victimMacAdr

      arp.opcode = arep
      arp.srcmac = mymac
      arp.dstmac = victimMacAdr
      arp.srcip = neededIP
      arp.dstip = victimIP

      PRINT   PARAMETERS: <message>
Displays the given message. Use symbol 
 in message to indicate that line feed must be performed.

 'send reply to $victimIP$, $victimMacAdr$\n'

      SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST   PARAMETERS: no parameters
Enables FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 regime for packet filter test. See "samples/FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

".

".

 and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

  // sends above packet
   }

   UNFIX   PARAMETERS: no parameters
By default after the work of WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) the statuses for all waited packets will be fixed, so there may be no packets to wait for the next call to WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

. This command marks these old packets as newly added. The previous status for them will be lost. Take a note of that ALL old packets will be unfixed, so they will be waited: this may cause unexpected results. Consider the use of CLEARREG   PARAMETERS: no parameters
Clears the information about all the packets which were added to the waited ones (by WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

, ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 (WAITALL   PARAMETERS: no parameters
The analog of WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command (or using of UNFIX   PARAMETERS: no parameters
By default after the work of WAIT command (its analogs) the statuses for all waited packets will be fixed, so there may be no packets to wait for the next call to WAIT. This command marks these old packets as newly added. The previous status for them will be lost. Take a note of that ALL old packets will be unfixed, so they will be waited: this may cause unexpected results. Consider the use of CLEARREG   PARAMETERS: no parameters
Clears the information about all the packets which were added to the waited ones (by WAIT, ADD   PARAMETERS: 
Alias of TOWAIT command.

 commands). They will not be displayed in final report (or in the report that is displayed by SHOWREP   PARAMETERS: no parameters
Displays a report which is the same as that displayed while program termination.

 command). If this command is typed at the end of script then it omits the displaying of final report (sense there are no packet in it).

 command.

 command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

 but before WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

 started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 commands). They will not be displayed in final report (or in the report that is displayed by SHOWREP   PARAMETERS: no parameters
Displays a report which is the same as that displayed while program termination.

 command). If this command is typed at the end of script then it omits the displaying of final report (sense there are no packet in it).

 command.


}