/*
 	Udp client using system socket, sends to 2 ports. There is a sample of corresponding server.
 */

OPEN   PARAMETERS: <interface's type> <interface's name>
Opens interface of given type. Types: eth, ip, tcp, udp. For tcp this command will wait till connection with server is established or a client connection is accepted. For other types the command won't wait. See more in -d,-p,-T options.

 'udp'
 'c:localhost:70#s2'
OPEN   PARAMETERS: <interface's type> <interface's name>
Opens interface of given type. Types: eth, ip, tcp, udp. For tcp this command will wait till connection with server is established or a client connection is accepted. For other types the command won't wait. See more in -d,-p,-T options.

 'udp'
 'c:localhost:69#s'

MI   PARAMETERS: <name of interface>
Sets the main interface at which packets will be generated or waited (by default it's the first opened interface). The unique name of interface must be specified which may be defined while opening (-d option or OPEN   PARAMETERS: <interface's type> <interface's name>
Opens interface of given type. Types: eth, ip, tcp, udp. For tcp this command will wait till connection with server is established or a client connection is accepted. For other types the command won't wait. See more in -d,-p,-T options.

 command) after symbol # (e.g. "-d eth0#0"). If no unique name is specified then it will be assigned to number 0,1,2,3,... Default requests are being overwritten: a single ACCEPT   PARAMETERS: {accept | drop | any }
Request specification. The request that the packet must be received. Analog of SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

 ACCEPT   PARAMETERS: {accept | drop | any }
Request specification. The request that the packet must be received. Analog of SEND ACCEPT. It may be processed as command while testing packet filter only (command FASTTEST or option -c). In common regime it may be among parameters to command only.

. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 or option -c). In common regime it may be among parameters to command only.

 request is set for the new main interface, others are ANY   PARAMETERS: {accept | drop | any }
Request specification. No requests: the packet may be received or not. Analog of SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

 ANY   PARAMETERS: {accept | drop | any }
Request specification. No requests: the packet may be received or not. Analog of SEND ANY. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 or option -c). In common regime it may be amoung parameters to command only. This special word may also be used as value for field that means exclusion the all conditions with this field from current mask of packet - value of the field may be any.

. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

".

 or option -c). In common regime it may be amoung parameters to command only. This special word may also be used as value for field that means exclusion the all conditions with this field from current mask of packet - value of the field may be any.

. This means that further WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will wait packet ONLY at the new main interface. In order to wait a packet at several interfaces use command DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT   PARAMETERS: {accept | drop | any }
Request specification. The request that the packet must be received. Analog of SEND ACCEPT. It may be processed as command while testing packet filter only (command FASTTEST or option -c). In common regime it may be among parameters to command only.

 ANY ANY   PARAMETERS: {accept | drop | any }
Request specification. No requests: the packet may be received or not. Analog of SEND ANY. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 or option -c). In common regime it may be amoung parameters to command only. This special word may also be used as value for field that means exclusion the all conditions with this field from current mask of packet - value of the field may be any.

... i.e. a single request for the first interface specified via option -d.

 after command MI   PARAMETERS: <name of interface>
Sets the main interface at which packets will be generated or waited (by default it's the first opened interface). The unique name of interface must be specified which may be defined while opening (-d option or OPEN   PARAMETERS: <interface's type> <interface's name>
Opens interface of given type. Types: eth, ip, tcp, udp. For tcp this command will wait till connection with server is established or a client connection is accepted. For other types the command won't wait. See more in -d,-p,-T options.

 command) after symbol # (e.g. "-d eth0#0"). If no unique name is specified then it will be assigned to number 0,1,2,3,... Default requests are being overwritten: a single ACCEPT   PARAMETERS: {accept | drop | any }
Request specification. The request that the packet must be received. Analog of SEND ACCEPT. It may be processed as command while testing packet filter only (command FASTTEST or option -c). In common regime it may be among parameters to command only.

 request is set for the new main interface, others are ANY   PARAMETERS: {accept | drop | any }
Request specification. No requests: the packet may be received or not. Analog of SEND ANY. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 or option -c). In common regime it may be amoung parameters to command only. This special word may also be used as value for field that means exclusion the all conditions with this field from current mask of packet - value of the field may be any.

. This means that further WAIT command (its analogs) will wait packet ONLY at the new main interface. In order to wait a packet at several interfaces use command DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 after command MI   PARAMETERS: <name of interface>
Sets the main interface at which packets will be generated or waited (by default it's the first opened interface). The unique name of interface must be specified which may be defined while opening (-d option or OPEN   PARAMETERS: <interface's type> <interface's name>
Opens interface of given type. Types: eth, ip, tcp, udp. For tcp this command will wait till connection with server is established or a client connection is accepted. For other types the command won't wait. See more in -d,-p,-T options.

 command) after symbol # (e.g. "-d eth0#0"). If no unique name is specified then it will be assigned to number 0,1,2,3,... Default requests are being overwritten: a single ACCEPT request is set for the new main interface, others are ANY. This means that further WAIT command (its analogs) will wait packet ONLY at the new main interface. In order to wait a packet at several interfaces use command DEFAULTS after command MI or explicitly specify requests after WAIT command.

 or explicitly specify requests after WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command.

 or explicitly specify requests after WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command.

 s2
udp.data  '70'
SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST   PARAMETERS: no parameters
Enables FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 regime for packet filter test. See "samples/FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

".

".

 and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).



MI   PARAMETERS: <name of interface>
Sets the main interface at which packets will be generated or waited (by default it's the first opened interface). The unique name of interface must be specified which may be defined while opening (-d option or OPEN   PARAMETERS: <interface's type> <interface's name>
Opens interface of given type. Types: eth, ip, tcp, udp. For tcp this command will wait till connection with server is established or a client connection is accepted. For other types the command won't wait. See more in -d,-p,-T options.

 command) after symbol # (e.g. "-d eth0#0"). If no unique name is specified then it will be assigned to number 0,1,2,3,... Default requests are being overwritten: a single ACCEPT   PARAMETERS: {accept | drop | any }
Request specification. The request that the packet must be received. Analog of SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

 ACCEPT   PARAMETERS: {accept | drop | any }
Request specification. The request that the packet must be received. Analog of SEND ACCEPT. It may be processed as command while testing packet filter only (command FASTTEST or option -c). In common regime it may be among parameters to command only.

. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 or option -c). In common regime it may be among parameters to command only.

 request is set for the new main interface, others are ANY   PARAMETERS: {accept | drop | any }
Request specification. No requests: the packet may be received or not. Analog of SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

 ANY   PARAMETERS: {accept | drop | any }
Request specification. No requests: the packet may be received or not. Analog of SEND ANY. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 or option -c). In common regime it may be amoung parameters to command only. This special word may also be used as value for field that means exclusion the all conditions with this field from current mask of packet - value of the field may be any.

. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

".

 or option -c). In common regime it may be amoung parameters to command only. This special word may also be used as value for field that means exclusion the all conditions with this field from current mask of packet - value of the field may be any.

. This means that further WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will wait packet ONLY at the new main interface. In order to wait a packet at several interfaces use command DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).

, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT   PARAMETERS: {accept | drop | any }
Request specification. The request that the packet must be received. Analog of SEND ACCEPT. It may be processed as command while testing packet filter only (command FASTTEST or option -c). In common regime it may be among parameters to command only.

 ANY ANY   PARAMETERS: {accept | drop | any }
Request specification. No requests: the packet may be received or not. Analog of SEND ANY. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 or option -c). In common regime it may be amoung parameters to command only. This special word may also be used as value for field that means exclusion the all conditions with this field from current mask of packet - value of the field may be any.

... i.e. a single request for the first interface specified via option -d.

 after command MI   PARAMETERS: <name of interface>
Sets the main interface at which packets will be generated or waited (by default it's the first opened interface). The unique name of interface must be specified which may be defined while opening (-d option or OPEN   PARAMETERS: <interface's type> <interface's name>
Opens interface of given type. Types: eth, ip, tcp, udp. For tcp this command will wait till connection with server is established or a client connection is accepted. For other types the command won't wait. See more in -d,-p,-T options.

 command) after symbol # (e.g. "-d eth0#0"). If no unique name is specified then it will be assigned to number 0,1,2,3,... Default requests are being overwritten: a single ACCEPT   PARAMETERS: {accept | drop | any }
Request specification. The request that the packet must be received. Analog of SEND ACCEPT. It may be processed as command while testing packet filter only (command FASTTEST or option -c). In common regime it may be among parameters to command only.

 request is set for the new main interface, others are ANY   PARAMETERS: {accept | drop | any }
Request specification. No requests: the packet may be received or not. Analog of SEND ANY. It may be processed as command while testing packet filter only (command FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 or option -c). In common regime it may be amoung parameters to command only. This special word may also be used as value for field that means exclusion the all conditions with this field from current mask of packet - value of the field may be any.

. This means that further WAIT command (its analogs) will wait packet ONLY at the new main interface. In order to wait a packet at several interfaces use command DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 after command MI   PARAMETERS: <name of interface>
Sets the main interface at which packets will be generated or waited (by default it's the first opened interface). The unique name of interface must be specified which may be defined while opening (-d option or OPEN   PARAMETERS: <interface's type> <interface's name>
Opens interface of given type. Types: eth, ip, tcp, udp. For tcp this command will wait till connection with server is established or a client connection is accepted. For other types the command won't wait. See more in -d,-p,-T options.

 command) after symbol # (e.g. "-d eth0#0"). If no unique name is specified then it will be assigned to number 0,1,2,3,... Default requests are being overwritten: a single ACCEPT request is set for the new main interface, others are ANY. This means that further WAIT command (its analogs) will wait packet ONLY at the new main interface. In order to wait a packet at several interfaces use command DEFAULTS after command MI or explicitly specify requests after WAIT command.

 or explicitly specify requests after WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command.

 or explicitly specify requests after WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in DEFAULTS   PARAMETERS: {accept | drop | any | REVERS   PARAMETERS: not command
Request specification. May only be given in parameters for DEFAULT command. Instructs to reverse the request for every packet.

 }
Defines default requests for packets. These requests will be applied when there are not enough explicitly defined requests for some packet (specified as parameters to command SEND, WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 and its analogs). Initially default requests are ACCEPT ANY ANY... i.e. a single request for the first interface specified via option -d.

 (command DEFAULT). For TCP DEVICE   PARAMETERS: <type of device> {<name of interface>}
Reopens interfaces. The type of device: eth, ip, tcp. The name of device is the same as for -d option, depends on the type of device. New line terminates the list of names.

 the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT   PARAMETERS: {accept | drop | any }
Analog of WAIT command. Adds the above packet to the set of packets which will be waited by command WAIT or its analogs. This command does not start actual waiting (doesn't suspend script execution). Nevertheless, just after adding the packet may be registered as received. If some packet is registered as received before the call to WAIT (WAITALL   PARAMETERS: no parameters
The analog of WAIT command. Doesn't add the previously defined packet to the list of waited ones. Starts waiting simply. Packets may be already added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command (or using of UNFIX command).

) then the command will ignore it and wait for a next packet (see also SENDWAITOTHER   PARAMETERS: no parameters
Works similar to "SEND WAITALL" sentence. Purpose: make atomic operation. Without this command there would be a chance that a waited packet did not cause command WAITALL stop waiting if it was accepted after SEND but before WAITALL started waiting. However it would be registered as received in any case. This command should be always used when you need to send a request and RELIABLY receive a response on it never missing.

).

 command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT   PARAMETERS: {accept | drop | any }
Waits for packet whose mask is defined above. The command will finish work when such packet is received on waitable interface. The waitable interface is interface for which strict request (accept or drop) have been specified in parameters to command or in defaults (command DEFAULT). For TCP device the command will only wait data on the main interface. In the general case command may wait no one but several packets (added by ADD   PARAMETERS: 
Alias of TOWAIT command.

 command). If any of them is received then command terminates. Command waits packets until timeout expires (command TIMEOUT   PARAMETERS: <interval in milliseconds>
Defines the timeout for WAIT command (and its analogs), also for imitation of application's work. Null value means infinite timeout (such timeout will not be applied for imitation of application's work). In the case of negative value its absolute value will be obtained as timeout, but WAIT command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command (its analogs) will work differently: it will always wait for the whole timeout (not terminating on first received packet). So several packets may be registered as received. This command also defines the timeout for TCP server while waiting for connections.

). See "samples/waiting_packets.fws".

 command.

 s
udp.data  '69'
SEND   PARAMETERS: {accept | drop | any }
In common regime generates the packet defined above. In other regimes (testing packet filter, see command FASTTEST   PARAMETERS: no parameters
Enables FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

 regime for packet filter test. See "samples/FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/FASTTEST   PARAMETERS: no parameters
Enables fasttest regime for packet filter test. See "samples/fasttest".

".

".

 and option -c) may simply separate packets one from another, so by this command the current content of buffer will be fixed and the new packet will be registered. The requests after command don't make sense in common regime (only while testing packet filter).



//PAUSE   PARAMETERS: <number of milliseconds>
Pauses the execution for a specified interval of time.

 5000
	
CLOSE   PARAMETERS: <interface's name>
Closes interface with given name.

 's'
CLOSE   PARAMETERS: <interface's name>
Closes interface with given name.

 's2'